 |
 |
 |
 |
|
| |
The Hercegov unit offers a very robust platform for any type of vehicle locating including fleet management and container tracking on CDMA networks. It has two optical inputs, 2 analog inputs (optional), and 2 output relays for control. These can be interfaced with various other systems for remote starting/disabling, door unlocking, alarm notifications, or any other triggers or measurements. Our unit can be configured over the air to change parameters in real time.
The system is ideal for stolen car recovery, fleet management, rental car monitoring, road services, boating and many others. |
|
| The ideal buyer of this unit is familiar with system integration and software development. The HCG-735 is compatible on the 1x CDMA Networks world-wide |
 |
| Sample price $275/unit |
|
| |
| GPS Global Position System |
 |
By CDMA 1X |
|
Send request by software from call center |
|
Receive position information, alarm and other information from sensors when connected with this unit |
| |
|
| For more information please contact us at info@hercegov.com |
|
|
| Functions: |
|
Alarm: Use sensors connected input port, we can check alarm , and also we can check speed alarm, area alarm, power supply off alarm, start alarm, GPS antenna broken alarm etc |
|
Position: Request from software, by time (minimum 1 second), by distance ( minimum 15 meters). |
|
Image: Support image remote transmission by RS-232 series port. |
|
Control: Output port control relay to make car shut down. |
|
Compatible: Can connect every type alarm unit from car. |
| Accessories: GPS antenna 1 set; GSM antenna 1 set; Cable 1 group.Basic function |
|
track localization |
|
emergency trigger which spread emergency reports |
|
long-distance control oil duct and electric circuit |
|
long-distance monitor |
|
| Diagram |
| Specifications; |
|
| NAME |
HCG-735 CDMA |
| Frequency and sensitivity |
Band: 800 MHz
Send frequency: 824 to 849 MHz
Accept frequency: 869 to 894 MHz
Sensitivity: Nominal -104dBm |
| Size |
77*44*19 (mm) |
| Temperature of environment |
-50°C to +85°C |
| Rate of speed |
up/down line 153 Kbps |
| Position inquiry way |
Hercegov locating accuracy: 5-50m |
| Chip TYPE |
qualcomm 1xRTT MSM6050 chip |
| Power supply way |
12-36V D/C |
| Answer way |
automatic monitor within 5 meters |
| Working temperature |
-30°C to +70°C |
|
Manual Instructions;
Setting: using mobile phone to set for the terminal
Setting content: alarming and management mobile phone (support 2 C/P numbers) or service center SMS number
Automatic monitor terminal with vocie in 5 meters scale (as customer demand, can limit to monitor two C/P numbers)
Locating mode: CDMA2000 1x Hercegov LBS model
Accurate locating: Outside (not cover) 5~50m/inside of rooom50~200m
Inquiry model: Web & C/P inquiry
|
 |
|
Terminal setting:
First correctly insert SIM card (if applicable), then charge, When the blue lamp light, then carries on the following each setting (the below setting letter with capital) |
|
|
| |
| 1. triggers alarming function |
| |
|
| |
(1) triggers alarming function setting |
| |
|
| |
It can setting two alarming number: |
| |
|
|
| |
|
1. Message format: Password +A+ alarming number(the first alarming number) |
| |
|
|
| |
|
2. Message format: Password +B+ alarming number (the second alarming number) |
| |
|
| |
setting successfully return to the information: setting successfully |
| |
|
| |
For example:setting the 1st alarming number,the password is 123456, neet to set number 13360588888, send message 123456A13713662486 to teminal |
| |
|
| |
(2) User press triggers alarming over 2 seconds, the carrier terminal to alarm,and send out message content which emergency help alarming |
| |
| 2. Cutting power and oil function |
| |
|
| |
(1) Cutting oil function setting: (need to control oil duct by A relay |
| |
|
| |
Cut off oil duct: send message: The password +cut off oil to carrier terminal number, operating |
| |
|
| |
successfully returns to the message: cutting off oil duct successfully; |
| |
|
| |
Closed oil duct: send message: The password + supply oil to carries terminal |
| |
|
| |
number, operating successfully returns message: Oil duct closed success |
| |
|
| |
For example: 123456 power off |
| |
3. monitor: The terminal connect to microphone, dial the terminal number, then monitors (according to customer’s demand it can be limited to monitor, namely, only setted alarming number can monitor)
|
| |
| 4. Modify passwords: |
| |
| Revised password message format: Original password + blank space + new password |
| |
| Transmit to carries terminal, revised password success,if revise failure will return |
| |
| For example: The original password is 123456, revise to be 100888 |
| |
| Send message 123456 S 100888 to carrier terminal number |
|
| |
Sample price $275/unit |
For more information please contact us at info@hercegov.com
|
| |
Home | Products | Support | Contact Us |
|
|
|
|
|
|
|
|
